EWP115 (NYLON) KIT (24V) - (PART #8026)

The EWP®115 (115 litres per minute) pump is suitable for small, medium, large, high- performance and 4WD vehicles. It’s a performance product that improves engine cooling control and capacity whilst giving you more power and torque and improved fuel economy.

 The EWP®115 is a practical alternative to the mechanical belt-driven pump or fitted as an auxiliary pump. Mechanical belt-driven water pumps run directly off the motor and sap engine power … the EWP®115 is hardwired into your electrical system, by-passing the engine and releasing up to an additional 10kw (13hp).

 Combined with the LCD EWP®/Fan Digital Controller (See Combo Pack Part #8831), the pump continues to run after you’ve switched off, eliminating “heat soak” and extending engine life.

Davies, Craig’s revolutionary, Australian-designed EWP® pumps are made from anti-corrosive, lightweight nylon reinforced with fibreglass. Universal fit allows for easy mounting into the bottom radiator hose. Our kits come with easy-to-understand DIY instructions and everything you need for easy installation, including different adaptors to fit various hose sizes and all necessary electrical wiring.

An Electric Water Pump is one of the most economical way to increase horsepower and save on fuel consumption whilst caring for your engine.

Used in conjunction with a Davies, Craig EWP® header adaptor kit, it can replace the mechanical water pump completely.

The world’s most advanced total engine cooling management

  • universal fit
  • more power
  • more cooling
  • increase fuel efficiency
  • extend engine life
  • world-leading technology
  • lightweight Nylon






EWP115 (Nylon) 24V


Adapter Rubber Sleeve 3mm (1/8”)


Hose Clamps


EWP Basic Pump Loom


Hardware Bag EWP115 Kit





Technical Specifications


24 Volt Pump

Operating voltage

20V DC to 27V DC

Maximum current

5.5A @ 24V

Flow rate (max)

115 L/min (30.38 US gal/min) @ 13V DC

Operating temp.

-40° to 130°C
(-40° to 266°F)

Pump design

Clockwise centrifugal with volute chamber

Pump weight

920 grams (2.03 lb)

Pump material

Nylon 66 - 30% Galss Filled

Burst pressure

500 kPa (72.5 psi)


Ceramic face seal

Self Priming

No, none of our pumps are self-priming

Fits hose sizes

35mm to 51mm (1⅜” to 2”)

Push on Fittings

Push-On fitting Size

EWP Inlet & Outlet 38mm

  • with 3mm Sleeve (#8510) 44mm
  • with 6mm Sleeve (#8511) 51mm


User Reviews

  • Be the first to review this product.

Please Login to add your review.