The EBP23 is a ‘brushless’ 12 volt, high flow (23 litres / 6.08 gallons per minute), magnetically driven water pump. The EBP motor has no brushes to ever wear out and the pump is magnetically driven by the motor, which means that no shaft sealing is required. The many EBP applications include: booster for car heater and LPG systems, solar pump applications, water cooled motorcycle, go-kart engines, turbo air / water intercoolers & household irrigation.
|Operating Voltage||9V to 15V DC|
|Max Current Draw||1.3 Amps|
|Pump Design||Recirculating * Centrifugal|
|Drive||Magnetic – No seals|
|Operating Temperature||-40C to +120C (-10F to +248F)|
|Burst Pressure||250Kpa (36PSI)|
|Flow Rate||23 L/min (6 gal/min)|
|Head Pumping Pressure||
|Weight||364g (0.8 lbs)|
Fits EBP Part Numbers:
The EBP®23 is designed to complement your existing Davies, Craig EWP (Electric Water Pump), or belt-driven mechanical water pump, or improve your heater and/or cooling system or assist engine block cooling circulation. The EBP can continually circulate coolant around the engine head, block and by-pass. It has a high flow capacity and has the advantage of running at a speed independent of the engine speed. The EBP® can also be set to continue running with a timer or thermal switch (not supplied) after engine shut down to prevent damaging heat soak.
EBP APPLICATION OPTIONS
The compact EBP23 has been designed for a number of applications;