10" THERMATIC® Electric FAN (24 VOLT) (PART #0146)

**Superseded by Part #0148**

All Davies Craig Thermatic® Fan are packaged with fan assembly (motor, fan blade, shroud and mounting feet).

A Davies Craig Thermatic® Fan is suitable for both condenser and radiator cooling. Thermatic® Fans provide; Constant air flow, increased fuel economy, air conditioning performance, cooler engine running, low profile, high performance, increased engine power and fully reversible blades and polarity for bi-directional air flow.

These fan assemblies are set up for upstream applications.

For downstream applications the fan blade must be removed and turned over and the polarity reversed. Always check that the fan blade rotates in the direction shown by the arrows on the blade before making a permanent wiring connection and prior to fastening the unit to the radiator.

Airflow 693 CFM (ft3/min)   #0215 Motor (24 Volt)
Maximum current

7.0A (12 Volt)

3.5A (24 Volt)

  #0317 Rotor (reversible, glass-filled nylon)
Weight 1.13 kg (2.5 lb)   #0365 Shroud (glass-filled polypropylene)

Height = 270mm

Depth = 64mm

  #0604 Mounting feet



hyperlink Image.jpg SINGLE FAN MOUNTING HARDWARE KIT (12V) (1000)

hyperlink Image.jpg SINGLE FAN MOUNTING HARDWARE KIT (24V) (1001)

hyperlink Image.jpg DUAL FAN MOUNTING KIT - UNIVERSAL 12V (1002)

hyperlink Image.jpg DUAL FAN MOUNTING KIT - UNIVERSAL 24V (1003)


The Davies, Craig Universal Fan Fitting Kit includes all parts necessary for mounting and wiring any 12- and 24-volt electric fans
– all Davies, Craig Thermatic® Fans and other electric fan models.

1000 - Kit (Small).jpg


 What size Thermatic® Fan do I need?
If your car make is not listed in our Model Selection Guide (see the Davies, Craig website, we suggest the following:

  1. Measure your radiator core dimensions (width, depth and clearance - refer diagram below) and refer to “Fan Models” to check which fan/s will fit your core.
  2. Davies Craig Thermatic® Fans are reversible (Ex: Brushless models) which means they can be mounted upstream or downstream, as illustrated below.
  3. In general, one large fan will have better airflow than two smaller fans. Where radiator is rectangular there may be no choice but to fit two smaller fans; choose the largest that can be accommodated in space available. The fan can also be mounted offset from centre to clear engine components when mounted in the downstream position.
    Note: Fans should not be fitted on opposite sides of radiator core unless these are offset such that the airflow of one is not interfering with the airflow of the other.
  4. If you require advice, please contact Davies, Craig for assistance.


Fan Mounting Direction

2011_DCPL_Catalogue-15 - Fan Mounting Options.jpg

User Reviews

  • Be the first to review this product.

Please Login to add your review.

Related Tech Tips

The size of correct application for electric fans vary greatly with each type of vehicle. Firstly consult your Davies, Craig selection guide. If the vehicle is not listed then measure the available radiator core area and space in the engine compartment between the radiator and the water pump or in the front of the air conditioning condenser. Then consult your Davies, Craig catalogue for the recommended fan sizes. Generally the larger the engine the larger the fan required. Upgrade to a larger size if yo have a turbo or plan to tow.It is important to follow these recommendations to ensure that you will get adequate cooling even under severe driving situations.