16" THERMATIC® / Electric FAN (24V) (PART #0172)

All Davies Craig Thermatic® Fan are packaged with fan assembly (motor, fan blade, shroud and mounting feet).

A Davies Craig Thermatic® Fan is suitable for both condenser and radiator cooling. Thermatic® Fans provide; Constant air flow, increased fuel economy, air conditioning performance, cooler engine running, low profile, high performance, increased engine power and fully reversible blades and polarity for bi-directional air flow.

These fan assemblies are set up for upstream applications.

For downstream applications the fan blade must be removed and turned over and the polarity reversed. Always check that the fan blade rotates in the direction shown by the arrows on the blade before making a permanent wiring connection and prior to fastening the unit to the radiator.

Airflow 2120 CFM (ft3/min)   #0221 Motor (24 Volt)
Maximum current

19.0A (12 Volt)

9.5A (24 Volt)

  #0322 Rotor (reversible, glass-filled nylon)
Weight 3 kg (6.6 lb)   #0366 Shroud (glass-filled polypropylene)

Height = 400mm

Depth = 100mm

  #0604 Mounting feet


UNIVERSAL FAN FITTING KIT (sold separately] 

hyperlink Image.jpg12 Volt - Part #1000

hyperlink Image.jpg24 Volt - Part #1001

The Davies, Craig Universal Fan Fitting Kit includes all parts necessary for mounting and wiring any 12- and 24-volt electric fans
– all Davies, Craig Thermatic® Fans and other electric fan models.

1000 - Kit (Small).jpg

 What size Thermatic® Fan do I need?
If your car make is not listed in our Model Selection Guide (see the Davies, Craig website, we suggest the following:

  1. Measure your radiator core dimensions (width, depth and clearance - refer diagram below) and refer to “Fan Models” to check which fan/s will fit your core.
  2. Davies Craig Thermatic® Fans are reversible (Ex: Brushless models) which means they can be mounted upstream or downstream, as illustrated below.
  3. In general, one large fan will have better airflow than two smaller fans. Where radiator is rectangular there may be no choice but to fit two smaller fans; choose the largest that can be accommodated in space available. The fan can also be mounted offset from centre to clear engine components when mounted in the downstream position.
    Note: Fans should not be fitted on opposite sides of radiator core unless these are offset such that the airflow of one is not interfering with the airflow of the other.
  4. If you require advice, please contact Davies, Craig for assistance.


Fan Mounting Direction

2011_DCPL_Catalogue-15 - Fan Mounting Options.jpg

User Reviews

  • Be the first to review this product.

Please Login to add your review.